1) Connect the powder case directly to the corresponding handpiece hose.
2) Slide back the handpiece to release the ring on the powder case joint and hold. Then insert the nozzle into the powder case joint and release the ring.
3) Unscrew the powder case cap. Break a seal of the cleaning powder pack, and fill some powder (about 1/3 height of the inner case) into the powder case. Recap the powder case cap securely.
4) After use, unscrew the powder case and empty the powder case competely.
5) Slide back the nozzle release thig and remove the nozzle from the powder case.
6) Wipe saliva and debris off the nozzle with alcohol-immersed cloth.
7) Remove the powder case from the coupling or from the nozzle.
8) Remove the O-ring thin gasket and the serrated powder case cover ring.
9) Clean the powder case body. Put the nozzle in hoiling water for 10 minutes if the powder passages are clogged badly.
10) Dry them competely for next use. |
